How to sharpen dog clippers The most challenging piece of canine grooming procedure is cutting the grown nails. Cutting the nails may be difficult yet cutting them in continuous intervals allows pet to walk normally. According to the veterinary specialists, overgrown nails can harm canine’s feet or tear the skin on the off chance that they scratch themselves excessively hard. Likewise, you don’t want scratches on the floor or sofa destroyed from their feet.

Table of Contents:

How to Sharpen Dog Nail Clippers?
Which dog clippers are available?
When to discard the Dog Nail Clippers?

How to Sharpen Dog Nail Clippers?

With persistent use, the dog nail scissors get dull, so sharpen the scissors or replace the clippers when it damages the nails instead of actually cutting. With such a large number of kinds of dog nail scissors accessible in the market, every blade requires its own instrument for maintenance. Disassembling the device is the most basic step of sharpening.

  1. If your scissors has an actuating level construction, put off the pin connecting scissors. When the clippers get destroyed, the sharp edges come off.
  2. Clean the gear. Use a fluid cleaner to dispose of nails, dead skin and residues.
  3. After cleaning, the following stage is sharpening the blade.

The instruments typically used in this assignment are stones and diamond rods. Depending on the type of bought dog nail clippers, one needs to utilize one of these tools to restore sharpness. A pet groomer usually favors the sharpening stone as its simple to utilize and give agreeable results.

Sharpening stone

For sharpening sharpen dog nail clippers at home, hold the sharp edge at the angle. It’s important as the stance will guarantee that the blade of the scissors is getting evenly sharpened. Slide the blade from side to side multiple times for the blade to get sharp. Wipe the buildup with a thick fabric and repeat a similar procedure on the opposite side.

When the blades are sharpened correctly, cautiously place them back and assemble the device. You can utilize few drops of oil on the sharp edges and scissors to grease up the instrument.

There is an alternate sort of dog nail scissors accessible in the market which will help in cutting the ingrown or contaminated nails. However, nonstop utilization of the scissors will in general affect its power causing uneven nails. This is why you have to sharpen dog nail clippers at home. The entire procedure may resemble a troublesome errand, but it’s very simple and takes less time than it seems to.

How often should dog clipper blades be sharpened?

Blunt clipper blades can’t effectively cut dog hair. Moreover, they cause discomfort to pets and even can be dangerous for them. That is why it is important to sharpen blades as soon as they go blunt. We can’t say for sure how frequently you will have to this, as it depends on the type of your pup’s coat and the frequency of cutting it. That said, you will easily understand that the blades went dull: if they start to pull hair, and the speed of cutting has decreased, it’s time to sharpen them.

Can I use clipper lubricant instead of oil?

Though you may get surprised, penetrating lubricants don’t work well on hair clippers. You see, you need a lightweight oil that can withstand high temperatures cause the blades of a clipper move close to each other at a high speed. Lubricants, motor oils, greases, and other heavy oils are not intended for delicate cutting surfaces let alone contacting the skin. If you have run out of clipper oil, you can try olive (not extra virgin olive oil) or vegetable oil until you get a bottle of new clipper blade oil.

Which dog clippers are available?

There are fundamentally three kinds of canine nail scissors accessible in the market.
Guillotine: This style of scissors features a retractable blade (it’s used manually and should be squeezed). The blade ought to be sharp to cut and not touch the nail near the skin. The main issue with a scissors is if the canine nail is excessively hard, it will crush or chip the nail as opposed to cutting it.
Scissors: As the name recommends, it’s a scissor intended to cut dog’s tuff nail. They are presumably the simplest type of dog nail scissors accessible in the market and utilized by the vast majority of the pet groomers.
Rotary Sander: This scissors for the dog has a turning sander that scrape the nails making them very smooth. This powerful apparatus can be slow when you are cutting the hard nail, and the noise can bother the pets. Likewise, the turning sander requires substitution of parts every now and again compared with other nail scissors.

When to discard the Dog Nail Clippers?

Sharpen dog nail scissors may not last long because it is a heavy-duty instrument. As a dog groomer, one needs to understand that every instrument should be replaced from time to time. Watch the wear-off and tears on the blades of the scissors. If the scissors are not working effectively, replace it promptly as it can hurt your pet’s nails.

Did the article help you?
Voted: 706
Robert Herrera
If you still have questions after reading the article, do not hesitate to ask questions.
Ask Question
Rate article
Tips, FAQs & Pet Products

Product reviews

Notify of
newest most voted
Inline Feedbacks
View all comments
Frederick Craig

Grooming is an essential part of pet ownership, and clippers are an important tool for a proper grooming routine. Many breeds of dog, including poodles, cocker spaniels, and schnauzers, are routinely clipped to help maintain a neat, clean appearance and reduce shedding. Wahl clippers are very popular with pet owners due to their reliability and ease of use. Sharpening Wahl clippers is not difficult, but is necessary for proper clipping.

Alexander Elliott

How Do I Clean My Blades?

Irene Herrera

Sharp clipper blades will ensure your clippers cut more easily, giving a better finish and neater results. If you blades are becoming blunt and not cutting so effectively there’s no need to replace them – we can sharpen them and bring your tools back to life. Whether you’re a professional dog groomer needing a bit of expert help to keep your blades in top condition, or your a dog owner who clips their own dog’s hair at home, we pride ourselves on our capacity to keep clippers cutting more safely and for longer by giving them a new lease of… Read more »

Nora Miles

Why Do Blades Dull?

Ethan Fox

Dog clipper blades are made to be sharpened again and again as many as 7-10 times. Clippers blades can be sharpened at a fraction of the cost of a new one. Small animal and large animal blades consist of 2 blades, a comb, and a cutter. If you look closely at a comb blade (large blade) you will see that there are 2 raised rails. The cutter (small blade) sets on these rails.When you have your clipper blades sharpened these rails are where the material is removed to bring your blade back to being sharp.

Would love your thoughts, please comment.x